Sturdy, inverted 'U' shaped metal clamp for easy fixing of traction system on to the bed. Specially bent square pipe (carrying a pulley) with a plastic capped knob allows simple hand tightening for height adjustment. Heavy duty rope (with 'S' hooks at both ends) which has to pass through the pulley acts as a transmission line for the traction. Coated metallic spreader bar (at the end of traction rope) to spread the straps of cervical/pelvic/leg traction system. High quality, graduated weight bag for filling water in the quantities of 1, 2, 3,...9 litres or pre-weighed quantity of sand up to 30 Kg. Identify the inverted 'U' clamp with pre-bent square pipe having a pulley. Cling on to the bed of the patient. Adjust the height of the pulley as per requirement by using the knob provided for fixing the same. Pass traction rope through the pulley before fixing the 'S' shaped hooks at both ends. Fill the weight bag with water or sand as desired before hooking on to the traction rope. Use the spreader bar to connect the traction brace/belt with the traction rope. Sprain, Dislocation Hand wash using cold water and mild soap. Air dry in shade. Do not brush hard. Do not squeeze. No machine wash.